admin
مدیر کل سایت
عضو شده در: 7 مهر 1385
پست: 26812
تشکر: 2167
تشکر شده 11716 بار در 5758 پست
محل سکونت: همدان 
امتیاز: 155491
[وضعيت كاربر:آفلاین]
|
 تاریخ: چهارشنبه 10 مهر 1387 - 14:18 عنوان: |
 |
|
این مجموعه را هم به تازگی پیدا کردم البته اکثر کتابها قبلآ در سایت قرار داده شده است ولی بد نیست که به طور یک جا هم در اینجا قرار داده شود
Bridge Engineering:Construction and Maintenance
(Principles and Applications in Engineering)
http://rapidshare.com/files/17603426/Bridge_Engineering_Construction_and_Maintenance_0849316847.rar
===================================================================================
Bridge Engineering : Substructure Design
(Principles and Applications in Engineering)
http://rapidshare.com/files/18371151/Bridge_Engineering_Substructure_Design_0849316812.rar
===================================================================================
Bridge Engineering : Seismic Design
(Principles and Applications in Engineering)
http://rapidshare.com/files/18472112/Bridge_Engineering_Seismic_Design_0849316839.rar
===================================================================================
AASHTO Standard Specification for Highway Bridges, 16th Ed
http://rapidshare.com/files/48177306/GRSSHB.rar
===================================================================================
CONCRETE BRIDGE ENGINEERING:
Performance and Advanced
http://rapidshare.com/files/13273864/Concrete_Bridge_Engineering_Performance_and_Advanced.rar
===================================================================================
BRIDGE ENGINEERING
http://w13.easy-share.com/1251983.html?F11
http://depositfiles.com/files/1099805
===================================================================================
REINFORCED CONCRETE DEEP BEAMS
http://rapidshare.com/files/11076575/Reinforced_Concrete_Deep_Beams_-_Prof._F.K.Kong.rar.html
http://www.rapidshare.com/files/4320086/Reinforced_Concrete_Deep_Beams.rar
http://mihd.net/z9ufog
===================================================================================
STRUCTURAL DETAILS in CONCRETE
http://rapidshare.de/files/22577434/Bangash_-_Structural_Details_In_Concrete__Blackwell_Scientific_1992_.pdf
===================================================================================
CONCRETE FORMWORK SYSTEMS
http://rapidshare.com/files/10841109/Concrete_Formwork_Systems_0824700724.rar
http://mihd.net/9auj70
===================================================================================
STRENGTHENING of REINFORCED CONCRETE STRUCTURES
http://www.rapidshare.com/files/4384913/Strengthening_of_Reinforced_Concrete_Structures.rar
===================================================================================
REPAIR, PROTECTION and WATERPROOFING of CONCRETE STRUCTURES, 3th Ed.
http://rapidshare.com/files/11933404/Repair__Protection_and_waterproofing_of_concrete_structures.pdf
http://www.file2upload.com/file/10017/ebc-repair–protection-and-waterproofing-of-concrete-structures-isbn10-0419202803-pdf.html
http://mihd.net/0mzqel
===================================================================================
PRACTICAL FOUNDATION ENGINEERING HANDBOOK, 2nd Ed
http://www.rapidshare.com/files/10956077/Practical_Foundation_Engineering_Handbook.rar
===================================================================================
PILE DESIGN and CONSTRUCTION PRACTICE, 4th Ed
http://rapidshare.com/files/32594371/Pile.Design.and.Construction.Practice-0419184503.rar
===================================================================================
FOUNDATION ANALYSIS and DESIGN, 5th Ed
http://rapidshare.com/files/9780506/bowles_-_foundation_analysis_and_design.rar
http://mihd.net/x5nsib
===================================================================================
COLD-FORMED STEEL DESIGN, 3rd Ed
http://rapidshare.com/files/11574013/0471348090.rar
http://mihd.net/02a3bh
===================================================================================
FINITE ELEMENT METHOD: A Practical Course
http://rapidshare.com/files/2332110/TheFinElementMethodpracticalcourse_muya.rar
http://www.4shared.com/file/8694599/e2f9a67d/TheFinElementMethodpracticalcourse_muya.html
===================================================================================
STABILITY OF STRUCTURES:
Elastic, Inelastic, Fracture, and Damage Theories
http://mihd.net/hywe94
===================================================================================
STANDARD HANDBOOK for CIVIL ENGINEERS, 4th Ed
http://www.rapidshare.com/files/18649908/standard_handbook_for_civil_engineers.rar
http://rapidshare.com/files/18062809/standard_handbook_for_civil_engineers.rar
===================================================================================
HANDBOOK of CIVIL ENGINEERING CALCULATIONS
http://www.rapidshare.com/files/9956411/Handbook_of_Civil_Engineering_Calculations_by_Hicks__Tyler_Gregory_-_1999.rar
http://www.rapidshare.com/files/15234963/Handbook_of_Civil_Engineering_Calculation.rar
===================================================================================
HANDBOOK of STRUCTURAL ENGINEERING, 2nd Ed
http://rapidshare.com/files/9628592/handbook_of_structural_engineering.rar
http://www.4shared.com/file/8704190/5a6007d1/handbook_of_structural_engineering.html
http://www.ftp2share.com/file/13657/ctural_engineering.rar.html
Jika memerlukan PASSWORD: ebooksclub
===================================================================================
STRUCTURAL ANALYSIS with FINITE ELEMENTS
http://rapidshare.com/files/14583894/structural_analysis_with_finite_elements.pdf
www.elektrotekno.com
http://rapidshare.com/files/57113774/ASCE_Journal_of_Structural_Engineering_October_2007.rar
===================================================================================
ACI STRUCTURAL JOURNAL
D. Ngo and A.C. Scordelis .(1967). “Finite Element Analysis of Reinforced Concrete Beams”, ACI Journal , March 1967
http://www.box.net/public/szj1pklj8g
===================================================================================
Peter Marti .(1985). “Basic Tools of Reinforced Concrete Beam Design”, ACI Journal, January-February 1985
http://www.box.net/public/l37ibquiar
===================================================================================
Frank J. Vecchio and Michael P. Collins.(1986). “The Modified Compression-Field Theory for Reinforced Concrete Element Subjected to Shear”, ACI Journal, March-April 1986
http://wiryanto.files.wordpress.com/2006/11/jp2.pdf
===================================================================================
Julio A. Ramirez and John E. Breen .(1991). “Evaluation of a Modified Truss-Model Approach for Beams in Shear”, ACI Structural Journal, V.88, No.5, September-October 1991
http://www.box.net/public/usliq65a3y
===================================================================================
Michael P. Collins, Denis Mitchell, Perry Adebar and Frank J. Vecchio .(1996). “A General Shear Design Method”, ACI Structural Journal, January-February 1996
http://wiryanto.files.wordpress.com/2006/11/jp24.pdf
===================================================================================
Brian S. Maxwell and John E. Breen. (2000). “Experimental Evaluation of Strut-and-Tie Model Applied to Deep Beam with Opening”, ACI Structural Journal, V.97 No.1, Januari-Februari 2000
http://www.box.net/public/z4rfdzhi9t
===================================================================================
Federico A. Tavarez, Lawrence C. Bank, and Michael E. Plesha .(2003). “Analysis of Fiber-Reinforced Polymer Composite Grid Reinforced Concrete Beams”, ACI Structural Journal, March-April 2003
http://wiryanto.files.wordpress.com/2006/11/tavarezbankpleshaacistructures2003.pdf
===================================================================================
Daniel Palermo and Frank J. Vecchio .(2003). “Compression Field Modeling of Reinforced Concrete Subjected to Reversed Loading: Formulation”, ACI Structural Journal, V. 100 / 5
http://wiryanto.files.wordpress.com/2006/11/100-s64.pdf
===================================================================================
Joel M. Barron and Mary Beth D. Hueste.(2004). “Diaphragm Effects in Rectangular Reinforced Concrete Buildings”, ACI Structural Journal, V. 101 / 5
http://wiryanto.files.wordpress.com/2006/11/acidiaphragm.pdf
===================================================================================
uan F. Correal, M. Saiid Saiidi, David Sanders, and Saad El-Azazy.(2007). “Shake Table Studies of Bridge Columns with Double Interlocking Spirals”, ACI Structural Journal V. 104 / 4
http://www.box.net/shared/g8slapk4i3
===================================================================================
Khaldoun N. Rahal. (2007). “Combined Torsion and Bending in Reinforced and Prestressed Concrete Beams Using Simplified Method for Combined Stress-Resultants”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/je82fqtyaf
===================================================================================
P. Revathi and Devdas Menon.(2007). “Slenderness Effects in Reinforced Concrete Beams”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/ohojsz9fg1
===================================================================================
Keun-Hyeok Yang, Heon-Soo Chung, and Ashraf F. Ashour.(2007).”Influence of Shear Reinforcement on Reinforced Concrete Continuous Deep Beams”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/l3706of3ai
===================================================================================
Joseph Robert Yost, Shawn P. Gross, David W. Dinehart, and Jason J. Mildenberg.(2007). “Flexural Behavior of Concrete Beams Strengthened with Near-Surface-Mounted CFRP Strips”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/vd2spmqec5
===================================================================================
Kyoung-Kyu Choi, Mahmoud M. Reda Taha, and Alaa G. Sherif .(2007). “Simplified Punching Shear Design Method for Slab-Column Connections Using Fuzzy Learning”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/1jxdyyrvgn
===================================================================================
Mary Beth D. Hueste, JoAnn Browning, Andres Lepage, and John W. Wallace .(2007). “Seismic Design Criteria for Slab-Column Connections”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/r4ibkb631s
===================================================================================
Hung-Jen Lee and Jen-Wen Ko. (2007).”Eccentric Reinforced Concrete Beam-Column Connections Subjected to Cyclic Loading in Principal Directions”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/8l2xn6cj0u
===================================================================================
Alexandros G. Tsonos.(2007). “Cyclic Load Behavior of Reinforced Concrete Beam-Column Subassemblages of Modern Structures”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/0o02gth37k
===================================================================================
Nam Ho Lee, Kang Sik Kim, Chang Joon Bang, and Kwang Ryeon Park.(2007). “Tensile-Headed Anchors with Large Diameter and Deep Embedment in Concrete”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/j6fmpbtxjg
===================================================================================
José R. Martí-Vargas, César A. Arbeláez, Pedro Serna-Ros, and Carmen Castro-Bugallo.(2007). “Reliability of Transfer Length Estimation from Strand End Slip”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/iljmpakgze
===================================================================================
Miguel Fernández Ruiz and Aurelio Muttoni.(2007). “On Development of Suitable Stress Fields for Structural Concrete”, ACI Structural Journal, V. 104 / 4
http://www.box.net/shared/augbzaxqdz
===================================================================================
Discussion by Himat Solanki: Shear Strength of Reinforced Concrete T-Beams without Transverse Reinforcement. Paper by A. Koray Tureyen, Tyler S. Wolf, and Robert J. Frosch (From the Sept.-Oct. 2006 ACI Structural Journal)
http://www.box.net/shared/kjy1104f10
===================================================================================
BULLETIN of THE NEW ZEALAND NSEE
M.J. Nigel Priestley .(1993). “Myths and Fallacies in Earthquake Engineering - Conflict between Design and Reality”, Bulletin of The New Zealand National Society for Earthquake Engineering, Vol. 26, No.3 September 1993
http://www.box.net/public/15nx6nx0b2
===================================================================================
CANADIAN JOURNAL of CIVIL ENGINEERING
M.P. Collins, F.J. Vecchio and G. Mehlhorn .(1985). “An international competition to predict the response of reinforced concrete panels”, Can. J. Civ. Eng. 12: 624�644
http://www.box.net/public/gyr4m3orln
===================================================================================
F.J. Vecchio and S. Balopoulou .(1990). “On the nonlinear behaviour of reinforced concrete frames”, Can. J. Civ. Eng. 17: 698�704
http://wiryanto.files.wordpress.com/2006/11/jp12.pdf
===================================================================================
R.G. Selby and F.J. Vecchio .(1997). “A constitutive model for analysis of reinforced concrete solids”, Can. J. Civ. Eng. 24: 460�470
http://wiryanto.files.wordpress.com/2006/11/jp27.pdf
===================================================================================
D. Svecova and R.J. Eden .(2004). “Flexural and shear strengthening of timber beams using glass fibre reinforced polymer bars ― an experimental investigation”, Can. J. Civ. Eng. 31: 45�55
http://www.box.net/public/efgjx92km6
===================================================================================
William Cavers and Gordon A. Fenton .(2004). “An evaluation of pile cap design methods in accordance with the Canadian design standard”, Can. J. Civ. Eng. 31: 109�119
http://wiryanto.files.wordpress.com/2006/11/l03-075.pdf
===================================================================================
Aftab A. Mufti, Baidar Bakht, Dagmar Svecova, and Vidyadhar Limaye .(2004). “Failure tests on full-scale models of grout laminated wood decks”, Can. J. Civ. Eng. 31: 133�145
http://wiryanto.files.wordpress.com/2006/11/l03-088.pdf
===================================================================================
Ricardo N.F. do Carmo and Sérgio M.R. Lopes .(2005). “Ductility and linear analysis with moment redistribution in reinforced high-strength concrete beams”, Can. J. Civ. Eng. 32: 194�203
http://wiryanto.files.wordpress.com/2006/11/l04-080.pdf
===================================================================================
Y.F. Li, S.H. Chen, K.C. Chang, and K.Y. Liu .(2005). “A constitutive model of concrete confined by steel reinforcements and steel jackets”, Can. J. Civ. Eng. 32: 279�288
http://wiryanto.files.wordpress.com/2006/11/l04-093.pdf
===================================================================================
COMPUTER and CONCRETE
Frank J. Vecchio, Evan C. Bentz and Michael P. Collins .(2004). “Tools for forensic analysis of concrete structures”, Computers and Concrete, Vol. 1, No. 1 (2004) 1-14
http://wiryanto.files.wordpress.com/2006/11/cac0101001.pdf
===================================================================================
COMPUTER and STRUCTURES
Lip H. Teh.(2004).”Beam element verification for 3D elastic steel frame analysis”, Computers and Structures 82 (2004) 1167�1179
http://www.box.net/public/7hbho3qk2g
===================================================================================
COMPOSITE STRUCTURES
A.J.M. Ferreira, P.P. Camanho, A.T. Marques, A.A. Fernandes .(2001). “Modelling of concrete beams reinforced with FRP re-bars”, Composite Structures 53 (2001) 107-116
http://wiryanto.files.wordpress.com/2006/11/experimental-study-of-composite-structures.pdf
==================================================================================
CONCRETE INTERNATIONAL
D.M. Rogowsky and J.G. MacGregor .(1986). “Design of Reinforced Concrete Deep Beams - Using the strut and tie model”, Concrete International, August 1986
http://www.box.net/public/kt5i92i4qt
==================================================================================
James K. Wight And Gustavo J. Parra-Montesinos . (2003). “Strut-and-Tie Model for Deep Beam Design: A practical exercise using Appendix A of the 2002 ACI Building Code”, Concrete International, May 2003
http://wiryanto.files.wordpress.com/2006/11/ci2505wight.pdf
==================================================================================
EARTHQUAKE ENGINEERING and ENGINEERING SEISMOLOGY
Thomas Paulay .(1999). “A Simple Seismic Design Strategy Based on Displacement and Ductility Compatibility”, Earthquake Engineering and Engineering Seismology, Vol.1 No.1
http://wiryanto.files.wordpress.com/2006/11/ee0101-5.pdf
==================================================================================
C. H. Yeh and C. H. Loh .(2001). “Methodology of Seismic Hazard Analysis and Damage Assessment”, Earthquake Engineering and Engineering Seismology, Vol.3 No.1
http://www.box.net/public/xnyb696oic
==================================================================================
EARTHQUAKE ENGINEERING and STRUCTURAL DYNAMICS
Sinan Akkar and Julian J. Bommer.(2007). “Prediction of elastic displacement response spectra in Europe and the Middle East”, Earthquake Engng Struct. Dyn. 2007; 36:1275�1301
http://www.box.net/shared/bsu3j90reh
==================================================================================
Chin-Hsiung Loh, Jerome P. Lynch, Kung-Chun Lu, Yang Wang, Chia-Ming Chang, Pei-Yang Lin and Ting-Hei Yeh.(2007). “Experimental verification of a wireless sensing and control system for structural control using MR dampers”, Earthquake Engng Struct. Dyn. 2007; 36:1303�1328
http://www.box.net/shared/xope67u9sf
==================================================================================
Songye Zhu and Yunfeng Zhang.(2007). “Seismic behaviour of self-centring braced frame buildings with reusable hysteretic damping brace”, Earthquake Engng Struct. Dyn. 2007; 36:1329�1346
http://www.box.net/shared/k7xuo3rizg
==================================================================================
R. Pinho, C. Casarotti and S. Antoniou.(2007). “A comparison of single-run pushover analysis techniques forseismic assessment of bridges”, Earthquake Engng Struct. Dyn. 2007; 36:1347�1362
http://www.box.net/shared/y3prl0ffq5
==================================================================================
Manuel Navarro,Francisco Vidal, Takahisa Enomoto, Francisco J. Alcala, Antonio Garcia-Jerez, Francisco J. Sanchez and Norio Abeki.(2007). “Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: The Adra town example (SE Spain)”, Earthquake Engng Struct. Dyn. 2007; 36:1363�1383
http://www.box.net/shared/7gxy9mvk4z
==================================================================================
M. R. Ghayamghamian, and G. R. Nouri.(2007). “On the characteristics of ground motion rotational components using Chiba dense array data”, Earthquake Engng Struct. Dyn. 2007; 36:1407�1429
http://www.box.net/shared/ls81864pe3
==================================================================================
EARTHQUAKE SPECTRA
Peter Fajfar .(2000). “A Nonlinear Analysis Method for Performance Based Seismic Design”, Earthquake Spectra, Vol.16 No.3
http://www.box.net/public/67kkzmp6pq
==================================================================================
Keith A. Porter,James L. Beck,and Rustem Shaikhutdinova .(2004). “Simplified Estimation of Economic Seismic Risk for Buildings”, Earthquake Spectra, Vol.20,No.4
http://www.box.net/public/r4r0aoqgjb
==================================================================================
ENGINEERING CONCRETE
E. Montoya, F.J. Vecchio, S.A. Sheikh .(2004). “Numerical evaluation of the behaviour of steel and FRP-confined concrete columns using compression field modelling”, Engineering Structures 26(2004) 1535-1545
http://wiryanto.files.wordpress.com/2006/11/jp52.pdf
==================================================================================
ENGINEERING STRUCTURES
Seung-Eock Kim, Kyung-Won Kang, Dong-Ho Lee .(2003). “Full-scale testing of space steel frame subjected to proportional loads”, Engineering Structures 25 (2003) 69�79
http://www.box.net/public/l59knmesqt
==================================================================================
H. Sezen, A.S. Whittaker, K.J. Elwood, K.M. Mosalam .(2003). “Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey”, Engineering Structures 25 (2003) 103�114
http://www.box.net/public/mgu9o9anxb
==================================================================================
L. Cavaleri, N. Miraglia, M. Papia .(2003). “Pumice concrete for structural wall panels”, Engineering Structures 25 (2003) 115�125
http://www.box.net/public/6tt6397fhr
==================================================================================
John L. Wilson .(2003). “Earthquake response of tall reinforced concrete chimneys”,Engineering Structures 25 (2003) 11�24
http://www.box.net/public/nysv1ay78n
==================================================================================
M. Brun, J.M. Reynouard, L. Jezequel .(2003). “A simple shear wall model taking into account stiffness degradation”, Engineering Structures 25 (2003) 1�9
http://www.box.net/public/qqe5cjv9id
==================================================================================
ENGINEERING JOURNAL - AISC
William A. Litle.(1966). “Small Scale Models for Steel Frameworks”, AISC Engineering Journal, July 1966
http://www.box.net/shared/jsk78idohq
==================================================================================
W.H. Munse .(1967). “High-Strength Bolting”, AISC Engineering Journal, January 1967
http://wiryanto.files.wordpress.com/2006/11/04_1_018.PDF
==================================================================================
A. Lally and W. A. Milek, JR..(1969). “Bridge Construction Details”, AISC Engineering Journal, January 1969
http://www.box.net/public/710m4vupjs
==================================================================================
Allen E. Wehrmeister.(1969). “Use of Ultrasonic Testing in the Structural Steel Industry”, AISC Engineering Journal, April 1969
http://www.box.net/public/cs2qne7249
==================================================================================
R. H. R. Tide And T. V. Galambos .(1970). “Composite Open-Web Steel Joists”, AISC Engineering Journal, January 1970
http://www.box.net/public/vr0tv26fm0
==================================================================================
Fazlur R. Khan and Anthony F. Nassetta.(1970).”Temperature Effects on Tall Steel Framed Buildings - Part 3―Design Considerations”, AISC Engineering Journal,October 1970
http://www.box.net/public/dhkjchygk5
==================================================================================
John H. A. Struik, Abayomi O. Oyeledun and John W. Fisher. (1973). “Bolt Tension Control with a Direct Tension Indicator”, AISC Engineering Journal, First Quarter 1973
http://www.box.net/shared/spvest96ie
==================================================================================
T.V. Galambos .(1978). “Load Factor Design of Steel Buildings”, AISC Engineering Journal, July 1978
http://wiryanto.files.wordpress.com/2006/11/09_3_108.pdf
==================================================================================
S.T. Rolfe .(1977). “Fracture and Fatigue Control in Steel Structures”, AISC Engineering Journal, First Quarter
http://wiryanto.files.wordpress.com/2006/11/14_1_002.PDF
==================================================================================
N. Krishnamurthy .(1978). “A Fresh Look at Bolted End-Plated Behavior and Design”, Engineering Journal, Second Quarter
http://wiryanto.files.wordpress.com/2006/11/15_2_039.PDF
==================================================================================
John D. Griffiths .(1984). “End-Plate Moment Connections - Their Use and Misuse”, Engineering Journal, First Quarter
http://wiryanto.files.wordpress.com/2006/11/21_1_032.PDF
==================================================================================
Michael P. Cohen .(1986). “Design Solutions Utilizing the Staggered-steel Truss System”, Engineering Journal, Third Quarter
http://wiryanto.files.wordpress.com/2006/11/265_ej_cohen.pdf
==================================================================================
Lambert Tall .(1989). “The Reinforcement of Steel Columns”, Engineering Journal, First Quarter 1989
http://www.box.net/public/i6lpmre60n
==================================================================================
Mark A. Bradford .(1991). “Buckling of Prestressed Steel Girders”, Engineering Journal, Third Quarter 1991
http://www.box.net/public/a2qbaen4js
==================================================================================
Patrick D. Zuraski .(1992). “The Significance and Application of Cb in Beam Design”, Engineering Journal, First Quarter
http://wiryanto.files.wordpress.com/2006/11/the-significance-and-application-ofcb-in-beamdesign.pdf
==================================================================================
W. McGuire .(1992). “Computers and Steel Design”, Engineering Journal, Fourth Quarter
http://wiryanto.files.wordpress.com/2006/11/computer-and-steel-design-wmc-guire.pdf
==================================================================================
Engineering Journal Vol. 29 tahun 1992
http://wiryanto.wordpress.com/2006/12/14/engineering-journal-vol29-th-1992-lengkap-gratis/
==================================================================================
Engineering Journal Vol. 30 tahun 1993
http://wiryanto.wordpress.com/2006/12/13/aisc-journal-bundel-1993-gratis/
==================================================================================
JOURNAL of THE CONSTRUCTION DIVISION
Boyd C. Paulson, Jr. (1976). “Goal for Education and Research in Construction”, Journal of Construction Division, September 1976
http://wiryanto.files.wordpress.com/2006/11/paulsonjcem.pdf
==================================================================================
JOURNAL of CONSTRUCTIONAL STEEL RESEARCH
A.M Citipitioglu, R.M. Haj-Ali, D.W. White .(2002). “Refined 3D finite element modeling of partially restrained connections including slip”, Journal of Constructional Steel Research 58 (2002) 995-1013
http://wiryanto.files.wordpress.com/2006/11/steel_connection_jcsr_1.pdf
==================================================================================
JOURNAL of PERFORMANCE OF CONSTRUCTED FACILITIES - ASCE
F.J. Vecchio .(2002). “Contribution of Nonlinear Finite-Element Analysis to Evaluation of Two Structural Concrete Failures”, Journal of Performance of Constructed Facilities, Vol. 16 No.3, August 1, 2002
http://wiryanto.files.wordpress.com/2006/11/jp44.pdf
==================================================================================
Frederick R. Rutz, and Kevin L. Rens.(2007).”Wind Loads for 19th Century Bridges: Design Evolution, Historic Failures, and Modern Preservation”, Journal of Performance of Constructed Facilities, Vol. 21 No.2, April 1, 2007
http://www.box.net/shared/r1vhakn3g0
==================================================================================
JOURNAL of MATERIALS IN CIVIL ENGINEERING
Chee Kiong Soh, Yu Liu, Yue Xing Dong and Xin Zheng Lu .(2003). “Damage Model Based Reinforced-Concrete Element”, Journal of Materials in Civil Engineering, Vol. 15, No.4, August 1, 2003
http://wiryanto.files.wordpress.com/2006/11/28.pdf
==================================================================================
JOURNAL of ENGINEERING MECHANICS - ASCE
F. J. Vecchio and A. DeRoo .(1995). “Smeared-Crack Modeling of Concrete Tension Splitting”, Journal of Engineering Mechanics, Vol. 121 / 6
http://wiryanto.files.wordpress.com/2006/11/jp23.pdf
==================================================================================
In-Won Lee, Hyung-Jo Jung, Man-Cheol Kim, and Arthur R. Robinson .(1999). “Eigensolution Method for Structures with Multiple or Close Eigenvalues”, Journal of Engineering Mechanics, Vol.125/ 11
http://www.box.net/public/nfzrjm19kg
==================================================================================
M. A. Bradford, B. Uy, Y. L. Pi. (2002). “In-plane Elastic Stability of Arches Under a Centra Concentrated Load”, Journal of Engineering Mechanics,Vol.128 / 7
http://www.box.net/shared/8cps3lghk0
==================================================================================
Ferhun C. Caner; and Zdenek P. Bazant .(2002).”Lateral Confinement Needed to Suppress Softening of Concrete in Compression”, Journal of Engineering Mechanics, Vol.128 / 12
http://www.box.net/public/qjpjiumo2h
==================================================================================
Lip H. Teh.(2005).”Spatial Rotation Kinematics and Flexural�Torsional Buckling”, Journal of Engineering Mechanics, Vol. 131 / 6
http://www.box.net/public/g6joy313jz
===================================================================================
JOURNAL of STRUCTURAL ENGINEERING - ASCE
Virote Boonyapinyo, Hitoshi Yamada and Toshio Miyata.(1994).”Wind-induced Nonlinear Lateral-Torsional Buckling of Cable-Stayed Bridges, Journal of Structural Engineering Vol.120/2
http://www.box.net/shared/m0epy3y8rq
===================================================================================
Abolghasem Saneinejad and Brian Hoobs .(1995). “Inelastic Design of Infilled Frames”, Journal of Structural Engineering, Vol.121/4
http://www.box.net/public/xqup9h3skn
===================================================================================
M.S Pfeil and R.C. Batista.(1995). “Aerodynamic Stability Analysis of Cable-Stayed Bridges”, Journal of Structural Engineering, Vol.121/12
http://www.box.net/shared/pcx5rr3o6o
===================================================================================
Madan, A., Reinhorn, A.M., Mander, J.B., and Valles, R.E. (1997). “Modeling of Masonry Infill Panels for Structural Analysis”, Journal of Structural Engineering Vol.123/10
http://www.box.net/shared/dxhv81mg3n
===================================================================================
Muhammad N. S. Hadi and Yoyong Arfiadi.(1998). “Optimum Desing of Absorber for MDOF Structures, Journal of Structural Engineering, Vol. 124/11
http://www.box.net/shared/555ufxtpnh
===================================================================================
Balaur S. Dhillon, James W. O’Malley III .(1999). “Interactive Design of Semirigid Steel Frames”, Journal of Structural Engineering, May 1999
http://www.box.net/public/ei38m4o2qx
===================================================================================
M.A. Polak and F.J. Vecchio .(1993). “Nonlinear Analysis of Reinforced-Concrete Shells”, Journal of Structural Engineering, Vol.119 / 12
http://wiryanto.files.wordpress.com/2006/11/jp19.pdf
===================================================================================
Joseph M. Bracci, Sashi K. Kunnath and Andrei M. Reinhorn .(1997). “Seismic Performance and Retrofit Evaluation of Reinforced Concrete Structures”, Journal of Structural Enginering, Vol. 123 / 1
http://wiryanto.files.wordpress.com/2006/11/kunnath-and-reinhorn.pdf
===================================================================================
Suchart Limkatanyu and Enrico Spacone .(2002). “Reinforced Concrete Frame Element with Bond Interfaces II: State Determinations and Numerical Validation”, Journal of Structural Engineering, Vol. 128 / 3
http://wiryanto.files.wordpress.com/2006/11/spaconelimkatanyuasce-st-3-2002b.pdf
===================================================================================
Qing Quan Liang, Brian Uy, and Grant P. Steven . (2002). “Performance-Based Optimization for Strut-Tie Modeling of Structural Concrete”, Journal of Structural Engineering, Vol.128 / 6
http://www.box.net/shared/yh6dda6n05
===================================================================================
Mettupalayam V. Sivaselvan and Andrei M. Reinhorn .(2002). “Collapse Analysis: Large Inelastic Deformations Analysis of Planar Frames”, Journal of StructuralEngineering, Vol. 128 / 12
http://wiryanto.files.wordpress.com/2006/11/sivaselvan-and-reinhorn_large.pdf
===================================================================================
F.J. Vecchio and W. Shim .(2004). “Experimental and Analytical Re-examination of Classic Concrete Beam Tests”, Journal of Structrual Engineering, Vol. 130 / 3
http://wiryanto.files.wordpress.com/2006/11/jp49.pdf
===================================================================================
Jianguo Nie, Jiansheng Fan and C. S. Cai . (2004). “Stiffness and Deflection of Steel�Concrete Composite Beams under Negative Bending”, Journal of Structural Engineering, Vol. 130 / 11
http://wiryanto.files.wordpress.com/2006/11/j2004-stiffness-and-deflection-of-steel-concrete-composite-beams-under-negative-bending.pdf
===================================================================================
Dimitrios Vamvatsikos and C. Allin Cornell . (2005). “Direct Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom Systems through Incremental Dynamic Analysis of Single Degree of Freedom Approximation”, Journal of Structural Engineering, Vol. 131 / 4
http://wiryanto.files.wordpress.com/2006/11/demand_and_capacity_through_spo2ida.pdf
===================================================================================
Tadeh Zirakian and Hossein Showkati. (2007). “Experiments on Distortional Buckling of I-Beams”, Journal of Structural Engineering, Vol. 133 / 7
http://www.box.net/shared/hq52ypo82v
===================================================================================
Vu Phan, M. Saiid Saiidi, John Anderson and Hamid Ghasemi.(2007). “Near-Fault Ground Motion Effects on Reinforced Concrete Bridge Columns”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/dgkpbe93ry
===================================================================================
Murat Dicleli and Anshu Mehta.(2007). “Efficient Energy Dissipating Steel-Braced Frame to Resist Seismic Loads”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/8h2gt5lpxb
===================================================================================
Feng Zhou, Khalid M. Mosalam and Masayoshi Nakashima.(2007). “Finite-Element Analysis of a Composite Frame under Large Lateral Cyclic Loading”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/98×4thafes
===================================================================================
K. A. Riederer and T. Haukaas.(2007). “Cost-Benefit Importance Vectors for Performance-Based Structural Engineering”, Journal of Structural Engineering, Vol. 133, No. 7
http://www.box.net/shared/48m7r9rh3c
===================================================================================
JOURNAL of BRIDGE ENGINEERING - ASCE
Uwe Starossek.(1996).”Cable-Stayed Bridge Concept for Longer Spans”, Journal of Bridge Engineering, Vol.1, No.3
http://www.box.net/public/vo3b9v8lo8
===================================================================================
Sami W. Tabsh and Kalpana Sahajwani .(1997). “Approximate Analysis of Irregular Slab-on-Girder Bridges”, Journal of Bridge Engineering,Vol. 2 / 1
http://wiryanto.files.wordpress.com/2006/11/approximate-analysis-of-irregular-slab-on-girder-bridges.pdf
===================================================================================
Mounir E. Mabsout, Kassim M. Tarhini, Gerald R. Frederick and Charbel Tayar .(1997). “Finite-Element Analysis of Steel Girder Highway Bridges”, Journal of Bridge Engineering,Vol. 2 / 3
http://wiryanto.files.wordpress.com/2006/11/finite-element-analysis-of-steel-girder-highway-bridges.pdf
===================================================================================
Eric M. Hines, David P. Billingtion .(1998). “Case Study of Bridge Design Competition”, Journal of Bridge Engineering, Vol.3, No.3
http://www.box.net/public/8dgtzy19e3
===================================================================================
A. Zureick and R. Naqib .(1999). “Horizontally Curved Steel I Girders State of The Art Analysis Methods”, Journal of Bridge Engineering, Vol. 4 / 1
http://wiryanto.files.wordpress.com/2006/11/horizontally-curved-steel-i-girders-state-of-the-art-analys.pdf
===================================================================================
Constantine C. Spyrakos, Emory L. Kemp,and Ramesh Venkatareddy.(1999).”Validated Analysis Of Wheeling Suspension Bridge”, Journal of Bridge Engineering, Vol.4, No.1
http://www.box.net/public/s23oqre2tn
===================================================================================
Marco Rosignoli .(1999). “Prestressing Schemes For Incrementally Launched Bridges”, Journal of Bridge Engineering, Vol.4, No.2
http://www.box.net/public/lgoyrmdfmr
===================================================================================
Toorak Zokaie .(2000). “AASHTO-LRFD Live Load Distribution Specification”, Journal of Bridges Engineering,Vol. 5 / 2
http://wiryanto.files.wordpress.com/2006/11/aashto-lrfd-live-load-distribution-specifications.pdf
===================================================================================
K. E. Barth and D. W. White .(2000).”Inelastic Design of Steel I-Girder Bridges”, Journal of Bridge Engineering, Vol. 5 / 3
http://wiryanto.files.wordpress.com/2006/11/inelastic-design-of-steel-i-girder-bridges.pdf
===================================================================================
Brett A. McElwain and Jeffrey A. Laman .(2000). “Experimental Verification of Horizontally Curved I-Girder Bridge Behavior”, Journal of Bridge Engineering, Vol. 5, No. 4
http://wiryanto.files.wordpress.com/2006/11/experimental-verification-of-horizontally-curved-i-girder-b.pdf
===================================================================================
Sami W. Tabsh and Muna Tabatabai.(2001).”Live Load Distribution In Girder Bridges Subject To Oversized Trucks”, Journal of Bridge Engineering, Vol.6, No.1
http://www.box.net/public/898bhcge0i
===================================================================================
Hung-Shan Shu and Yang-Cheng Wang.(2001).”Stability Analysis Of Box-Girder Cable-Stayed Bridges”, Journal of Bridge Engineering, Vol.6, No.1
http://www.box.net/public/deqyn31017
===================================================================================
Q. W. Zhang, T. Y. P. Chang, and C. C. Chang .(2001). “Finite-Element Model Updating for The Kap Shui Mun Cable-Stayed Bridge”, Journal of Bridge Engineering, Vol. 6 / 4
http://wiryanto.files.wordpress.com/2006/11/finite-element-model-updating-for-the-kap-shui-mun-cable-st.pdf
===================================================================================
Gregor P. Wollmann.(2001).”Preliminary Analysis of Suspension Bridges”, Journal of Bridge Engineering, Vol.6, No.4
http://www.box.net/public/nspjt7ytgr
===================================================================================
M. Schlaich .(2001). “Erection of Cable-Stayed Bridges Having Composite Decks With Precast Concrete Slabs”, Journal of Bridge Engineering, Vol. 6 / 5
http://wiryanto.files.wordpress.com/2006/11/erection-of-cable-stayed-bridges-having-composite-decks-wit.pdf
===================================================================================
Bruce A. Moulds .(2001). “Design Considerations for Aircraft Bridges”, Journal of Bridge Engineering, Vol. 6 / 6
http://wiryanto.files.wordpress.com/2006/11/design-considerations-for-aircraft-bridges.pdf
===================================================================================
Junsik Eom and Andrzej S. Nowak .(2001).”Live Load Distribution For Steel Girder Bridges”, Journal of Bridge Engineering, Vol.6, No.6
http://www.box.net/public/vvjn74e6pj
===================================================================================
Zhong Liu, Fang Li, and W. M. Kim Roddis .(2002).”Analytic Model of Long-Span Self-Shored Arch Bridge”,Journal of Bridge Engineering, Vol.7, No.1
http://www.box.net/public/a1jy233xi4
===================================================================================
Khaled M. Sennah, and John B. Kennedy .(2002).”Literature Review in Analysis of Box-Girder Bridges”,Journal of Bridge Engineering, Vol.7, No.2
http://www.box.net/public/89cpe23fb4
===================================================================================
Ahmad M. Itani, Michael Bruneau, Lyle Carden and Ian G. Buckle .(2004). “Seismic Behavior of Steel Girder Bridge Superstructures”, Journal of Bridges Engineering,Vol. 9 / 3
http://wiryanto.files.wordpress.com/2006/11/asce-2004-itani-bruneau-carden-buckle.pdf
===================================================================================
JOURNAL of ADVANCED CONCRETE TECHNOLOGY
Hajime Okamura and Masahiro Ouchi .(2003). “Self-Compacting Concrete”, Journal of Advanced Concrete Technology, Vol.1 No.1
http://wiryanto.files.wordpress.com/2006/11/1_5.pdf
===================================================================================
Shunsuke Otani .(2004). “Earthquake Resistant Design of Reinforced Concrete Buildings - Past and Future”, Invited Paper, Journal of Advanced Concrete Technology Vol.2 No.1
http://wiryanto.files.wordpress.com/2006/11/003-024.pdf
===================================================================================
Kiang Hwee Tan . (2004). “Design of Non-Prismatic RC Beams Using Strut-and-Tie Models”, Journal of Advanced Concrete Technology, Vol. 2 No.2
http://wiryanto.files.wordpress.com/2006/11/design-of-non-prismatic-rc-beams-using-strut-and-tie-models.pdf
===================================================================================
Tomohiro Miki and Junichiro Niwa . (2004). “Nonlinear Analysis of RC Structural Members Using 3D Lattice Model”, Journal of Advanced Concrete Technology, Vol. 2 No.3
http://www.box.net/shared/n113yeoz6c
===================================================================================
JOURNAL of STRUCTURAL ENGINEERING SOCIETY NEW ZEALAND
John Butterworth .(2000). “Ductile Concentrically Braced Frames using Slotted Bolted Joints”, SESOC Journal Vol. 13 No.1 April 2000
http://wiryanto.files.wordpress.com/2006/11/xbracesesoc.pdf
===================================================================================
JOURNAL of WIND ENGINEERING and INDUSTRIAL AERODYNAMICS
Toshio Miyata.(2003).”Historical view of long-span bridge aerodynamics”,Journal of Wind Engineering and Industrial Aerodynamics 91 (2003) 1393�1410
http://www.box.net/shared/8×7s6de1ph
===================================================================================
MODERN of STEEL CONSTRUCTIONS
Kenneth J. Wright and Matthew A. Bunner .(1997). “High Strength Steel Reduces Truss Costs: A new bridge across the Chelyan River in West Virginia utilized Gr.36, 50 and 70 steels”, Modern Steel Construction / October 1997
http://www.box.net/public/h4294od0tv
===================================================================================
Steven A. Weinhold, P.E. .(1997). “Erection Engineering For Steel Bridge Superstructures”, Modern Steel Construction / October 1997
http://www.box.net/public/m3036qate1
===================================================================================
Michael E. Trunko .(1997). “Galvanizing Eliminates Repainting On Bridges : A turn-key operation specializes in designing, fabricating and erecting galvanized truss bridges, Modern Steel Construction / October 1997
http://www.box.net/public/3oai51ybfg
===================================================================================
Lawrence G. Griffis .(2006). A Culture of Discipline: Structural engineers must approach their work with diligence and a great sense of responsibility to themselves, their firms, and society”, Modern Steel Construction / December 2006
http://www.box.net/public/dmf1vitcoa
===================================================================================
PCI JOURNAL
M.J. Nigel Priestley, S. (Sri) Sritharan, James R. Conley, Stefano Pampanin. (1999). “Preliminary Results and Conclusions From the PRESSS Five-Story Precast Concrete Test Building”, PCI JOURNAL November-December 1999
http://www.box.net/shared/5lui147f57
===================================================================================
Sidney Freedman .(1999). “Loadbearing Architectural Precast Concrete Wall Panels”, PCI JOURNAL September-October 1999
http://www.box.net/shared/tcp0tfz2g2
===================================================================================
ROYAL ACADEMY of ENGINEERING
Tony Fitzpatrick.(1991). “Linking London: The Millennium Bridge”,The Royal Academy of Engineering, Westminster, London, June 2001
http://www.box.net/shared/6y28sckm0j
===================================================================================
STRUCTURAL CONCRETE
F. J. Vecchio .(2001). “Non-linear finite element analysis of reinforced concrete: at the crossroads ?”, Structural Concrete 2001 Vol.2 No. 4
http://wiryanto.files.wordpress.com/2006/11/jp40.pdf
===================================================================================
Stefano Pampanin .(2003). “Alternative design philosophies and seismic response of precast concrete buildings”, Structural Concrete 2003 Vol.4 No.4 . The author is one of the winners of the fib 2003 diplomas to younger engineers in the Research category
http://eacef.files.wordpress.com/2007/08/fib_news_dec03.pdf
===================================================================================
E. Caetano and A. Cunha.(2004). “Experimental and numerical assessment of the dynamic behaviour of a stress-ribbon footbridge”, Structural Concrete 2004 Vol.5,No.1
http://www.box.net/public/g4z5ev27a3
===================================================================================
C. G. Papanicolaou and T. C. Triantafillou .(2004). “Analysis and minimum cost design of concrete sandwich panels under out-of-plane loading”, Structural Concrete 2004 Vol.5,No 1
http://www.box.net/public/tujqzyff91
===================================================================================
STRUCTURAL ENGINEERING INTERNATIONAL
Michel Virlogeux, Claude Servant, Jean-Marie Cremer,Jean-Pierre Martin, Marc Buonomo.(2005). “Millau Viaduct, France”, Structural Engineering International 1/2005
http://www.box.net/public/ossgffjhs8
===================================================================================
Federico M. Mazzolani.(2006). “Structural Applications of Aluminium in Civil Engineering”, Structural Engineering International 4/2006
http://www.box.net/public/hn2a844l2f
===================================================================================
THIN-WALLED STRUCTURES - ELSEVIER
K.F. Chung *, K.H. Ip.(2000).”Finite element modeling of bolted connections between coldformed steel strips and hot rolled steel plates under static shear loading”, Engineering Structures 22 (2000) 1271�1284
http://www.box.net/shared/iedn6jdo16
===================================================================================
H.C. Ho, K.F. Chung .(2006). “Analytical prediction on deformation characteristics of lapped connections between cold-formed steel Z sections”, Thin-Walled Structures 44 (2006) 115-130
http://wiryanto.files.wordpress.com/2006/11/analytical-prediction-on-deformation-characteristics-of-lapped-connections-between-cold-formed-steel-z-sections.pdf
===================================================================================
Tae Soo Kima, Hitoshi Kuwamura. (2007). “Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear”, Thin-Walled Structures 45 (2007) 407�421
http://www.box.net/shared/myf7cs079n
===================================================================================
“Analisa Inelastis Portal - Dinding Pengisi dengan Equivalent Diagonal Strut”, Jurnal Teknik Sipil - ITB, Edisi Vol. 12 / 4, Oktober 05, Institut Teknologi Bandung, Bandung (down-load PDF 358 kb)
http://sipil-uph.tripod.com/jurnal_itb.pdf
===================================================================================
“Proyek Tangki Air dari Semen-Pasir-Bambu di Mesjid Al-Ikhlas, Binong ,Tangerang”, Jurnal Teknik Sipil - UPH, Vol.2 No.1 Januari 2005, Universitas Pelita Harapan, Banten. (down-load PDF 324 kb)
http://sipil-uph.tripod.com/jurnal_tangki_air.pdf
===================================================================================
“Perancangan Balok Beton Bertulang dengan SAP2000″, Jurnal Teknik Sipil - UPH, Vol.1 No.2 Juli 2005, Universitas Pelita Harapan, Banten. (down-load PDF 323 kb)
http://sipil-uph.tripod.com/desain_dng_sap2000.pdf
===================================================================================
“Lebih Dekat dengan Kampus Uni-Stuttgart di Kota Asal Mercedes Benz”, Majalah PELITA HARAPAN , Volume III/1, Jan.-Maret 04. (read …. or down-load PDF 184 kb)
http://sipil-uph.tripod.com/ttg_stuttgart.pdf
===================================================================================
“STRUKTUR JEMBATAN TERINGAN dan TERKUAT (TERKOKOH) - Studi kasus : Jembatan Model UPH pada KJBI 2005 dan KJI 2006″, seminar “Research and Education in Engineering for Prospected Technology - National Conference on Prospected Technology 2007 (NCPT 2007)”, Universitas Maranatha, 24-25 Agustus 2007, Bandung (down-load paper 199 kb)
http://www.box.net/shared/2zzxqsc1og
===================================================================================
“Metode s.t.m untuk Perencanaan Struktur Transfer-Wall Proyek ‘Kota Kasablanka’ Jakarta”, seminar “The 2nd National Civil Engineering Conference”. Jurusan Teknik Sipil, Fakultas Teknik, Unika Soegijapranata, Semarang, 20 � 21 Desember 2006 (down-load paper PDF 160 kb)
http://www.box.net/shared/yelpbgyujc
===================================================================================
“Ilmu Rekayasa Klasik Sarana Menguasai Program Aplikasi Rekayasa - Studi Kasus: Mekanika Teknik Klasik dan Program SAP2000″, Pembicara Utama dalam Seminar di Pameran Buku Konstruksi Indonesia 2006, R. Sapta Taruna, Gd. Utama Departemen Pekerjaan Umum, Jl. Pattimura 20, Sabtu, 2 Desember 2006 (down-load paper PDF 883 kb dan presentasi 1,620 kb)
http://www.box.net/public/l28myclfm8
http://www.box.net/public/kmouyrnuj4
===================================================================================
“Evaluasi Metode Perencanaan Batang Aksial Murni SNI-03-1729-2000 dan AISC-LRFD”, Civil Engineering Conference: Toward Sustainable Civil Engineering Practice , Surabaya, 25-26 Agustus 2006, Universitas Kristen PETRA (down-load PDF)
http://www.petra.ac.id/kts06/papers/17-KTS-SE-15.pdf
===================================================================================
“Strategi Analisis Struktur dengan Kabel Prategang memakai SAP2000″, Civil Engineering Conference: Toward Sustainable Civil Engineering Practice, Surabaya, 25-26 Agustus 2006, Universitas Kriten PETRA (down-load PDF)
http://www.petra.ac.id/kts06/papers/15-KTS-SE-13.pdf
===================================================================================
“Perlunya Pembelajaran Baja Cold-Formed dalam Kurikulum Konstruksi Baja di Indonesia” , prosiding Lokakarya Pengajaran Mekanika Teknik, Konstruksi Beton dan Konstruksi Baja, Jurusan Teknik Sipil, FT Universitas Udayana, Bukit, Jimbaran, Bali (down-load PDF 619 kb)
http://www.box.net/public/f72kq0d75a
===================================================================================
“Pemrograman sebagai Sarana Pembelajaran Rekayasa”, prosiding Lokakarya Pengajaran Mekanika Teknik, Konstruksi Beton dan Konstruksi Baja, Jurusan Teknik Sipil, FT Universitas Udayana, Bukit, Jimbaran, Bali (down-load PDF 398 kb)
http://www.box.net/shared/a1has697yh
===================================================================================
Simulasi Numerik Berbasis Komputer sebagai Solusi Pencegah Bahaya akibat Kegagalan Bangunan”, Presentation and Proceeding at the Seminar Nasional Kegagalan Bangunan, Solusi dan Pencegahannya, Jurusan Teknik Sipil, Universitas Pelita Harapan, Lippo Karawaci, Rabu 3 Mei 2006 (down-load PDF 771 kb)
http://sipil-uph.tripod.com/wir_kegagalan_bangunan.pdf
===================================================================================
“Strategi Penyelesaian Numerik Berbasis Komputer Analisis Lentur Ultimate Penampang Beton (Model Tegangan Parabolik PCA)”, Presentation and Proceeding at the Seminar Nasional Teknologi II, Universitas Teknologi Yogyakarta, 10 December 2005 (down-load PDF 280 kb)
http://sipil-uph.tripod.com/wiryanto_di_uty.pdf
===================================================================================
“Masih perlukah mempelajari Mekanika Teknik Klasik dalam Era Serba Komputer ?”, Presentation and Proceeding at the Lokakarya Pengajaran Konstruksi Beton dan Mekanika Teknik, Jurusan Teknik Sipil, Institut Teknologi Sepuluh Nopember (ITS) Surabaya, 13-14 July 2005. (down-load PDF 180 kb)
http://sipil-uph.tripod.com/wiryanto_di_its.pdf
===================================================================================
“Evaluasi Kinerja Struktur Baja Tahan Gempa dengan Analisa Pushover”, Presentation and Proceeding at the Civil Engineering National Conference Sustainability Construction & Structural Engineering Based on Professionalism, Unika Soegijapranata, Semarang, 17-18 Juni 2005 (down-load PDF 784 kb)
http://sipil-uph.tripod.com/wiryanto_di_soegijapranata.pdf
===================================================================================
“Simulasi Keruntuhan Balok Beton Bertulang Tanpa Sengkang dengan ADINA TM”, Proceeding at the Seminar Nasional Rekayasa Material dan Konstruksi Beton 2005, Jurusan Teknik Sipil � ITENAS, Bandung, Sabtu, 4 June 05. (down-load PDF 453 kb)
http://sipil-uph.tripod.com/wiryanto_di_itenas.pdf
===================================================================================
Steel Handbook
ISBN: 0070087822
Title: Structural Steel Designer’s Handbook, 3rd edition, 1999-11
Author: Roger L Brockenbrough, Frederick S. Merritt
Publisher: McGraw-Hill Professional
Publication Date: 1999-11-11
Number Of Pages: 1208
Section 1. Properties of Structural Steels and Effects of Steelmaking and Fabrication
Roger L. Brockenbrough, P.E.
(PDF 299 kb) http://www.box.net/public/pp7smbb2v0
Section 2. Fabrication and Erection
Thomas Schflaly
(PDF 214 kb) http://www.box.net/public/a973×4d6hb
Section 3. General Structural Theory
Ronald D. Ziemian, Ph.D.
(PDF 893 kb) http://www.box.net/public/idtm28m93p
Section 4. Analysis of Special Structures
Louis F. Geschwindner, P.E.
(PDF 429 kb) http://www.box.net/public/0618aa8hsb
Section 5. Connections
William A. Thornton, P.E., and T. Kane, P.E.
(PDF 769 kb) http://www.box.net/public/sm84r7c3oh
Section 6. Building Design Criteria
R. A. LaBoube, P.E.
(PDF 844 kb) http://www.box.net/shared/29ysl1l0p9
Section 7. Design of Building Members
Ali A. K. Haris, P.E.
(PDF 230 kb) http://www.box.net/shared/e4fllp7seu
Section 8. Floor and Roof Systems
Daniel A. Cuoco, P.E.
(PDF 580 kb) http://www.box.net/public/nfgl0gfyg2
Section 9. Lateral-Force Design
Charles W. Roeder, P.E.
(PDF 392 kb) http://www.box.net/public/5ouxfi63f1
Section 10. Cold-Formed Steel Design
R. L. Brockenbrough, P.E.
(PDF 320 kb) http://www.box.net/public/q61tvny2ju
Section 11. Design Criteria for Bridges
Part 1. Application of Criteria for Cost-Effective Highway Bridge Design
Robert L. Nickerson, P.E., and Dennis Mertz, P.E.
(PDF 426 kb) http://www.box.net/shared/683jaqpx2b
Part 2. Railroad Bridge Design
Harry B. Cundiff, P.E.
(PDF 190 kb) http://www.box.net/public/y4xmkucf0q
Section 12. Beam and Girder Bridges
Alfred Hedefine, P.E.,John Swindlehurst, P.E., and Mahir Sen, P.E.
(PDF 1,126 kb) http://www.box.net/public/31r7kt9bg1
Section 13. Truss Bridges
John M. Kulicki, P.E., Joseph E. Prickett, P.E.,and David H. LeRoy, P.E.
(PDF 379 kb) http://www.box.net/shared/yn8ktrbenc
Section 14. Arch Bridges
Arthur W Hedgren, Jr., P.E.
(PDF 1,138 kb) http://www.box.net/shared/v4hsy185tk
Section 15. Cable-Suspended Bridges
Walter Podolny, Jr., P.E.
(PDF 1,224 kb) http://www.box.net/public/2tysegzxa0
===================================================================================
**peraturan beton dari SNI 2002**
http://wiryanto.wordpress.com/2007/01/31/sharing-knowledge/
===================================================================================
SNI 03-1729-2002 ya.
http://wiryanto.wordpress.com/2006/12/03/aisc-2005-gratis/
===================================================================================
A m e r i c a n S o c i e t y o f C i v i l E n g i n e e r s
M i n i m u m D e s i g n L o a d s f o r B u i l d i n g s a n d
O t h e r S t r u c t u r e s
A. S_ C. E atau S. E_ I seri 7 tahun 05
Chapter 1 � General (down-load PDF 178 kb) http://www.box.net/shared/zl5gdmga64
Chapter 2 � Combinations of Loads (down-load PDF 75 kb) http://www.box.net/shared/qzlmxx2yoo
Chapter 3 - Dead Loads Soil Loads and Hydrostatic Pressure
(down-load PDF 53 kb) http://www.box.net/shared/i1btsok82n
Chapter 4 � Live Loads (down-load PDF 221 kb) http://www.box.net/shared/c39ip0ih3u
Chapter 5 � Flood Loads (down-load PDF 164 kb) http://www.box.net/shared/l3y0v8u015
Chapter 6 � Wind Loads (down-load PDF 2,232 kb) http://www.box.net/shared/19lcmv4eif
Chapter 7 � Snow Loads (down-load PDF 474 kb) http://www.box.net/shared/otgmohd2o6
Chapter 8 � Rain Loads (down-load PDF 37 kb) http://www.box.net/shared/gdvck4prc7
Chapter 9 - Reserved for Future Provisions (down-load PDF 26 kb) http://www.box.net/shared/749f3xq036
Chapter 10 - Ice Loads-Atmospheric Icing (down-load PDF 576 kb) http://www.box.net/shared/1p3lnlph7x
Chapter 11 - Seismic Design Criteria (down-load PDF 498 kb) http://www.box.net/shared/kv2d7k9mey
Chapter 12 - Seismic Design Requirements for Building Structures
(down-load PDF 1,242 kb) http://www.box.net/shared/zbsrjoyn5u
Chapter 13 - Seismic Design Requirements for Nonstructural Components
(down-load PDF 553 kb) http://www.box.net/shared/639ed9xism
Chapter 14 - Material-Specific Seismic Design and Detailing Requirements
(down-load PDF 528 kb) http://www.box.net/shared/4y0zvo2q7y
Chapter 15 - Seismic Design Requirements for Nonbuilding Structures
(down-load PDF 760 kb) http://www.box.net/shared/qk0sn25y9e
Chapter 16 - Seismic Response History Procedures
(down-load PDF 118 kb) http://www.box.net/shared/m6gx84nk6f
Chapter 17 - Seismic Design Requirements for Seismically Isolated Structures
(down-load PDF 533 kb) http://www.box.net/shared/sdccu4th9b
Chapter 18 - Seismic Design Requirements for Structures with Damping Systems
(down-load PDF 734 kb) http://www.box.net/shared/lz71aj39nv
Chapter 19 - Soil Structure Interaction for Seismic Design
(down-load PDF 134 kb) http://www.box.net/shared/s799zy1ytu
Chapter 20 - Site Classification Procedure for Seismic Design
(down-load PDF 88 kb) http://www.box.net/shared/fu9zj4j9lg
Chapter 21 - Site-Specific Ground Motion Procedures for Seismic Design
(down-load PDF 1,633 kb) http://www.box.net/shared/dg1p9t4mjj
Chapter 22 - Seismic Ground Motion and Long-Period Transition Maps
(down-load PDF 1,424 kb) http://www.box.net/shared/sgo2mju54v
Chapter 23 - Seismic Design Reference Documents (down-load PDF 147 kb) http://www.box.net/shared/tfl1o5d9di
Appendix 11A Quality Assurance Provisions
Appendix 11B Existing Building Provisions
Appendix C Serviceability Considerations (down-load PDF 239 kb) http://www.box.net/shared/ppj7l9vyxa
COMMENTARY (down-load PDF 6,616 kb) http://www.box.net/shared/ui357rq9ct
===================================================================================
Civil Engineering Textbooks for Reference
DESIGN OF CONCRETE STRUCTURES, 13th By Arthur.H.Nilson McGraw-Hill, New York, 2004
down load di http://rapidshare.com/files/31542208/Design_of_concrete_structures_A.H.Nilson_13th_edition.rar
Masih ada lagi lho !
HANDBOOK OF CORROSION ENGINEERING (10,47MB)
By Roberge, P.R, McGraw-Hill, 1999
download di http://rapidshare.de/files/20323168/Roberge_P.R._-_Handbook_of_Corrosion_Engineering__McGraw-Hill_1999_.rar
download di http://rapidshare.com/files/41811552/Roberge_P.R._-_Handbook_of_Corrosion_Engineering__McGraw-Hill_1999.rar
STEELWORK CORROSION CONTROL (12,74MB)
By D.A. Bayliss, Taylor & Francis, 2002
download di http://mihd.net/7s4vz9
SOIL MECHANICS IN ENGINEERING PRACTICE (48,22MB)
By Karl Terzaghi, John Willey & Sons, Inc., 1996
download di http://rapidshare.com/files/9854991/smiep.rar
BUILDING DESIGN AND CONSTRUCTION HANDBOOK (6th Ed)
McGraw-Hill, 2000
download di http://www.4shared.com/file/8692903/ff9f5292/BuildingDesign_and_ConstructionHandbook_muyac.html
download di http://www.bestsharing.com/files/ms001107403/Building%20Design%20and%20Construction%20Handbook.pdf.htm
BRIDGE ENGINEERING HANDBOOK
By Wai Fah Chen, CRC Press, 1999
Part 1:50 MB - Part 2 : 50 MB - Part 3 :18,925 MB
download di http://www.4shared.com/file/9197544/8021306f/wwwallislamnet_Almourrakochi_Bridge_Engineering_Handbookpart1.html
download di http://www.4shared.com/file/9199091/a3f10f75/wwwallislamnet_Almourrakochi_Bridge_Engineering_Handbookpart2.html
download di http://www.4shared.com/file/9199778/41e18cda/wwwallislamnet_Almourrakochi_Bridge_Engineering_Handbookpart3.html
BRIDGE ENGINEERING SEISMIC DESIGN (55MB)
By Wai-Fah Chen, CRC Press, 2003
download di http://mihd.net/simhvn
===================================================================================
Steel Design Guide Series
Column Base Plates
Design of Column Base Plates
John T. DeWolf
Professor of Civil Engineering
University of Connecticut
Storrs, Connecticut
http://www.box.net/shared/6329yi9j6m
===================================================================================
Design Guide for Low-and Medium-Rise Steel Buildings
http://www.box.net/shared/8umfzqjlgd
===================================================================================
Floor Vibrations
http://www.box.net/shared/2reeczbq3n
===================================================================================
Staggered Truss Framing Systems
http://www.box.net/shared/7xefpnamof
===================================================================================
AWS D1.1 las
http://www.4shared.com/dir/1882148/a7350711/JIS.html
===================================================================================
Structure Engineer
http://www.4shared.com/file/14624844/27f6d177/Manual_of_Stel_Construction_2nd_ed_LRFD93.html
http://www.4shared.com/dir/2541514/8ece5c0f/sharing.html
===================================================================================
SNI tentang gempa SNI 1726-2002
http://www.box.net/public/755vo6dqbh
–
Source:
Abraham Imam Muttaqin
Offshore Structural Engineer
Visit my blog : http://www.abraham-otc.blogspot.com
منبع : http://gatotsipil.wordpress.com/2008/06/27/good-references-all-about-structural-engineering-for-free/
_________________
دوره تحلیل غیرخطی و بهسازی لرزه ای سازه ها در Sap2000 و Etabs ، مدرس: مهندس تنباکوچی http://www.iransaze.com/ftopict-38564.html |
|
